Case Trimmers

This little power adapter will accept all PMA Mini-Quick Trimmers and convert them to use with a 1/4" hex drive power screwdriver, drill, or case prep unit. It uses the same 5/64" hex wrench set screw to secure the Mini Quick Case Trimmer as the trimmer...

Accepts PMA Tool Caseholders.  Driving spindle for Benchrite Case Neck Lathe. For use with cases with small rifle primer pockets.

  Our friends over at Benchrite have pretty much created the pinnacle of case turning motors. The Benchrite Case Prep Lathe will cut your time spent turning necks in half and is our prefered method to use with our Micro-Adjust Case...

 Spare cutter for all case trimmers. Works for both Micro-Adjust and Mini-Quick Trimmers from PMA Tool.

Accepts PMA Tool Caseholders.  Driving spindle for Benchrite Case Neck Lathe. For cases with large rifle primer pockets.

Available Early March  Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case...

We've updated our Micro-Adjust Case Trimmer to a more compact size, and added a removable hex drive unit. The second generation Micro-Adjust Trimmer is over an inch shorter, but maintains the spring loaded tool head and easily adjustable trim length of...

 Our Mini Quick Trimmers are a great way to trim your brass by hand or under power. These trimmers index off the case shoulder and are intended for trimming a couple of thousandths of material off at a time. They are a great choice for shooters who...

This product includes Benchrite's new Threaded Chuck Spindle and the Jacobs Keyless Chuck assembled and ready to go on your Case Neck Turning Lathe. You can chuck a case neck brush, primer pocket uniformer, flash hole reamer or any other accessory you...

Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as a...

 Our Mini Quick Trimmers are a great way to trim your brass by hand or under power. These trimmers index off the case shoulder and are intended for trimming a couple of thousandths of material off at a time. They are a great choice for shooters who...

 Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as...