PMA Rod Guide BAT 2Lug - 308

For rifles chambered in 308, 30BR, 30-06, 280Rem, 7mm-08 and 7mm BR (and many others).

This Rod Guide will fit any action with a bolt diameter between .715" and .720". This includes BAT 2 Lug actions: S, SV, SB, B, MB, DS, M, CT, L, HR and VR.

We've taken the best features of the rod guides we've been using for years and put them into one guide. 

The PMA Rod Guide Features:

• 12.25" overall length

• CNC Lathe Turned Black Delrin
• Our guides are made from black delrin because it doesn't stain and discolor like white delrin. 

• Integral Solvent Port
• The integral solvent port is machined and located properly, not too big, not too small, and not directly under the scope eye piece (at least for most rifles).

• Postitive Markings
• Our guides are laser marked and paint filled; the paint may eventually wear off, but unlike stickers or identifying marks made by a marker, the engraving is there to stay. 

• Red Silicone O-Rings
• In our opinion, red silicone o-rings hold up better to solvents and because they are a contrasting color to the black delrin, any wear and tear on the o-ring is instantly recognizable.

• Aluminum Rod Guide Insert
• We use aluminum for our rod guide insert, this allows us to hold a tighter tolerance on the inside diameter ensuring support for the cleaning rod. Aluminum also lets us give the end of the insert a nice, sharp, clean knurl for pulling the insert out of the guide.

• Dual O-Ring Insert
• Our insert also has two o-rings instead of just one so it doesn't wobble inside of the guide. The less everything wobbles, the straighter the rod will be in the bore.

• Clear Reusable Packaging
• We use the same telescoping plastic tube used to transport and ship high dollar cutting tools. It easily holds a rod guide and insert and is clear so the markings on the rod guide can be seen.