PMA Neck Turning Tool Model A 30 degree

(28 reviews) Write a Review
Frequently bought together:


The PMA Neck Turning Tool is the best neck turner available today. You know why you need or want to neck turn, but with so many different models on the market, which do you choose? The factors determining your choice of neck turning tools essentially boils down to three key demands; ease and repeatability of adjustment, comfort of use and cut finish. This tool absolutely satisfies these demands.


Our neck turning tool does not use a course or fine drive screw to move the cutter towards or away from the mandrel. We don’t utilize an unnecessary micrometer or dial indicator. Nor do we rotate the mandrel on an eccentric which changes the center of the cut and has inconsistent adjustment. Our Model A neck turning tool simply adjusts by moving the mandrel toward or away from the stationary cutter with VERY minimal backlash. The Model A utilizes a super-fine 80TPI drive screw giving you .0002” adjustment between each mark, the marks have ample space between them allowing you to make adjustments as fine as .0001”.  Tool does not include mandrel.


To see a video of this neck turning  tool in use go to:  


·         Adjustments of 0.0002” are easy to accomplish

o       (0.0001” adjustments not out of the questions)

·         Accepts PMA or Sinclair neck turning mandrels (sold separately)

o       Also accepts K&M mandrels with the use of an adaptor

·         Carbide cutter should never go dull

o       Available in multiple cutter angles

1.      30˚ for a wide variety of cartridges including BR, PPC, RSAUM and 6.5x47

2.    30° for short-neck (<.250") cartridges such as 204 Ruger, 17 FB and various wildcats

3.      35˚ for 284 and WSM family cartridges

4.      40˚ for improved cartridges

5.      40  for short-neck (<.250") cartridges such as Dasher and various wildcats

6.      17.5˚ cutter for 30-06 family

7.      20˚ cutter for 308 family and 338 Lapua

8.      23˚ cutter for 223 family

9.      28˚ cutter for 22-250 (also work for 6mm Rem)

·         Replacement cutters available separately

·         Large ergonomic design

o       Fits the hand well with good heft without being too heavy

o       Size & shape keeps the tool easy to control under the torque of a case lathe or power drill








View AllClose

28 Reviews

  • 5
    Neck turning tool

    Posted by steve minckler on 7th Sep 2021

    works awesome , it fits my hand perfect and the quality of the tool is excellent .

  • 5
    PMA tool neck turning tool (30 degree cutter)

    Posted by Don Dory on 25th Jul 2021

    This is my fourth cutter, I find it simpler to have a cutter for each cartridge I reload. The cutter is simple to adjust, the depth cut adjustment is calibrated and easy to adjust for different neck wall thicknesses. Using a vertical drill and the PMA Case holders trimming necks is quick and easy. Yes, actually not a pain.

  • 5
    Neck turning tool (30 deg. )

    Posted by Ranger188 on 24th Jan 2021

    This PMA unit has greatly reduced the fine lines compared to other companies neck cutters.

  • 5
    Neck turning tool

    Posted by Allen Gaskin on 15th Jan 2021

    The best tool on the market in my opinion.

  • 5
    Best out there

    Posted by William Higgins on 28th Dec 2020

    For me, this tool does the best, most consistent results, and I have tried 3 others from competitors. Wide cutter appears to be the key.

  • 5
    Best Neck Turning Tool I've used

    Posted by Greg McMurrey on 17th Aug 2020

    I have a lot of neck turning equipment, I turn for .22cal, 6mm, 6.5mm, 7mm, .30cal and .33cal. This is the easiest and most accurate adjusting tool I have ever used. If I had one critique and its a small one, I would love for there to be something on the back of the tool I can chuck up in my lathe. I like to have my lathe turn the cases for me. I will make something to fit a tool holder for it but other than that, it is perfect.

  • 5
    Accurate, smooth, easy to adjust

    Posted by Don Dory on 2nd Aug 2020

    This is the third one I purchased(20, 30, and 40 degree cutters) With their driver reasonable single pass cuts are quite feasible. The micrometer adjustment is accurate and the instructions are clear, concise, and helpful. Moreover, if neck turning with different brass manufacturers the adjustment to just even out the case necks is simple. In my case some brass needs to be at 0.132 and another needs to be at 0.146 to just even the necks.

  • 5
    excellent tool

    Posted by Richard Genaro on 11th Jun 2020

    Just getting into Benchrest and loading the PPC. I found the neck turner intuitive, easy to use, and exactly accurate. Thanks-

  • 5
    A superb neck turning tool

    Posted by Vlad Parpura on 8th May 2020

    This tool fixes all the problem I have had with other tools. The idea to move the case and not the blade is phenomenal. I micrometer is superb. The attention to to detail is great, instructions are simple and clear, with all the practical tips needed. Technical and customer support is second to none. I highly recommend this tool.

View AllClose