PMA Neck Turning Tool Model A 35 degree

(6 reviews) Write a Review
Frequently bought together:


The PMA Neck Turning Tool is the best neck turner available today. You know why you need or want to neck turn, but with so many different models on the market, which do you choose? The factors determining your choice of neck turning tools essentially boils down to three key demands; ease and repeatability of adjustment, comfort of use and cut finish. This tool absolutely satisfies these demands.


Our neck turning tool does not use a course or fine drive screw to move the cutter towards or away from the mandrel. We don’t utilize an unnecessary micrometer or dial indicator. Nor do we rotate the mandrel on an eccentric which changes the center of the cut and has inconsistent adjustment. Our Model A neck turning tool simply adjusts by moving the mandrel toward or away from the stationary cutter with VERY minimal backlash. The Model A utilizes a super-fine 80TPI drive screw giving you .0002” adjustment between each mark, the marks have ample space between them allowing you to make adjustments as fine as .0001”.  Tool does not include mandrel.


To see a video of this neck turning  tool in use go to:  


·         Adjustments of 0.0002” are easy to accomplish

o       (0.0001” adjustments not out of the questions)

·         Accepts PMA or Sinclair neck turning mandrels (sold separately)

o       Also accepts K&M mandrels with the use of an adaptor

·         Carbide cutter should never go dull

o       Available in multiple cutter angles

1.      30˚ for a wide variety of cartridges including BR, PPC, RSAUM and 6.5x47

2.    30° for short-neck (<.250") cartridges such as 204 Ruger, 17 FB and various wildcats

3.      35˚ for 284 and WSM family cartridges

4.      40˚ for improved cartridges

5.      40  for short-neck (<.250") cartridges such as Dasher and various wildcats

6.      17.5˚ cutter for 30-06 family

7.      20˚ cutter for 308 family and 338 Lapua

8.      23˚ cutter for 223 family

9.      28˚ cutter for 22-250 (also work for 6mm Rem)

·         Replacement cutters available separately

·         Large ergonomic design

o       Fits the hand well with good heft without being too heavy

o       Size & shape keeps the tool easy to control under the torque of a case lathe or power drill







View AllClose

6 Reviews

  • 5

    You guys are awesome. Your products are the intersection of simplicity, functionality, quality, and art. I had a cheaper neck turner before I decided to spend the coin on yours. The PMA is not even the most expensive setup by the time you put together all the add ons to bring a competitor "close". Absolutely no regrets and the only money that was wasted was what I spent on the cheap stuff first. Your carbide options are worth every penny too. Your stuff just simply does what it is supposed to do without being overly complicated.

  • 5
    Neck Turning Tool Model A 35 degre

    Seams to work very well and very easy to set up

  • 5
    Great Tool

    First neck turner I have owned. Easy to use and very precise. I would buy one again in a heart beat.

  • 5
    Well designed neck trimmer

    sturdy and sized well to hold in the hand. Purchased with the carbide mandrel. Easy to set up and adjust. Trims very well.

  • 5
    Well designed neck trimmer

    sturdy and sized well to hold in the hand. Purchased with the carbide mandrel. Easy to set up and adjust. Trims very well.

  • 5
    Awesome turner

    I had to fight with my previous turner to get it set to where it was before for any cartridge. The PMA goes right where you set it on the dial and cuts very accurately. I love it.

View AllClose