Neck Turning Equipment

Available Early March  Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case...

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

PMA Carbide Neck Turning Mandrels (PCM-10xx) When treated and maintained properly, stainless steel mandrels (specifically 17-4 stainless) will retain their size and finish for years under normal use, satisfying the needs of most reloaders. That being...

This product includes Benchrite's new Threaded Chuck Spindle and the Jacobs Keyless Chuck assembled and ready to go on your Case Neck Turning Lathe. You can chuck a case neck brush, primer pocket uniformer, flash hole reamer or any other accessory you...

Don Nielson makes one of the two best neck turning tools ever made. We have had a lot of customer requests for a carbide cutter option for their Don Nielson "Pumpkin" Neck Turning Tools and we always try to listen to our customers so we decided to make...

PMA Carbide Neck Turning Mandrels (PCM-10xx) When treated and maintained properly, stainless steel mandrels (specifically 17-4 stainless) will retain their size and finish for years under normal use, satisfying the needs of most reloaders. That being...

Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as a...

Don Nielson makes one of the two best neck turning tools ever made. We have had a lot of customer requests for a carbide cutter option for their Don Nielson "Pumpkin" Neck Turning Tools and we always try to listen to our customers so we decided to make...

 Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as...

This mandrel measures a nominal .242". Our standard neck turning mandrels measure .002" under bullet diameter. Over the years we have had several requests to make a neck turning mandrel that measures .001" under bullet diameter.   Used in our...

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

Looking for a replacement cutter for your Sinclair 1000, 2000, or 4000 Neck Turning Tool?  Look no further. These cutters are a direct replacement ground from carbide so they'll last pretty much forever.