Barrel Changing & Gunsmithing Tools

Soft rubber caps slip on to protect barrel tenon of any barrel with a 1" - 1.062 diameter (Bats, Pandas, Halls, etc). We put these on along with another cap for the muzzle to protect the the tenon and crown of our barrels prior to storing them in a...

Soft rubber cap slips on to protect muzzle and crown from damage. Fits muzzle diameters .875"- .940". We put these on along with a cap for the barrel tenon prior to storing the barrel in a barrel bag.

These Deluxe Barrel Vises are made by our friend Bob "The Viper" Pastor. Machined from 6061 aluminum and finished with a durable, baked on, non-slip powdercoat, these deluxe barrel vises feature the usual hardened bolts and nuts along with fully captured...

Some shooters and gunsmiths really prefer to use a torque wrench when installing barrels because they want to maintain the exact same headspace each time they swap a barrel back. For those who prefer to use a torque wrench we offer hex end action...

Quite a bit of testing went into the updated PMA Barrel Vise. From the metal finishing on the aluminum to maximize grip and minimize marks left on the barrel to the ability to handle barrels from .830" to 1.500"+ this barrel vise is based on the...

These action wrenches have the features we prefer in an action wrench. They are rear entry only, meaning that regardless of your port configuration you can use this wrench on almost any Kelbly, Remington, Stiller, Pierce, Shilen, Savage, etc… As...

Some shooters and gunsmiths really prefer to use a torque wrench when installing barrels because they want to maintain the exact same headspace each time they swap a barrel back. For those who prefer to use a torque wrench we offer hex end action...

These action wrenches have the features we prefer in an action wrench. They are rear entry only, meaning that regardless of your port configuration you can use this wrench on almost any 2 lug Bat ever made. They are machined from stainless steel so they...

Some shooters and gunsmiths really prefer to use a torque wrench when installing barrels because they want to maintain the exact same headspace each time they swap a barrel back. For those who prefer to use a torque wrench we offer hex end action...

Gunsmiths have been using barrel micrometers like this one for decades and the instructions really couldn't be easier. Simply drop the correct Go Gauge into the previously installed barrel, slip the barrel micrometer over the tenon and record that...

Some shooters and gunsmiths really prefer to use a torque wrench when installing barrels because they want to maintain the exact same headspace each time they swap a barrel back. For those who prefer to use a torque wrench we offer hex end action...

These action wrenches have the features we prefer in an action wrench. They are rear entry, meaning that regardless of your port configuration you can use this wrench on nearly any 3 Bat Lug ever made. They are machined from stainless steel so they are...