Barrel Tuners

This is the wrench we use to install PMA Barrel Tuners onto barrels. This wrench is made from aluminum and will not scratch the hex on the tuner itself.

Darrel Loker has been making barrel tuners for sometime now and we have found his design to be among the best we've seen. Turned from stainless steel and weighing in at 5oz this tuner is laser marked for easy reference. The two piece design with the use...

Since introducing our barrel tuners, we've had a ton of requests for a tuner for barrels that are already threaded for a brake or other muzzle device. This barrel tuner is threaded 1/2-28. When designing the PMA Barrel Tuner we consulted with shooters...

When designing the PMA Barrel Tuner we consulted with shooters in the benchrest community added this knowledge to our own experiences in both rimfire and centerfire competitive shooting to create what we believe is the easiest to install, tune and clean...

Since introducing our barrel tuners, we've had a ton of requests for a tuner for barrels that are already threaded for a brake or other muzzle device. This barrel tuner is threaded 5/8-24 When designing the PMA Barrel Tuner we consulted with shooters in...

While developing the PMA Tuner Cleaning Tool we discovered that there were a lot of different methods we could use to get the job done with this tool. Selecting how we cleaned the tuner depended on how dirty the tuner was and how quickly we needed to get...

 Unfortunately, due to International Trade Regulations and the expense of licensing, the rimfire barrel tuners are unavailable for export out of the U.S. We apologize for any inconvenience to our international customers. A rimfire barrel tuner is a...