Miscellaneous Maintenance Tools

V-Block featuring a cup to secure the spring pin that retains the ejector plunger on your bolt. Our Ejector Removal Tools snap in place to prevent rotating and for storage.

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT 3L or Mavrick bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

This handy little gadget slips over the bolt shroud to make removing the fire control from your Kauger bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT 2L bolt an even easier task. There are two different shroud shapes on BAT actions and this tool handles both. One side of the tool removes one shroud...

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT Neuvo bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

This is our version of the little ejector tool we made while we were with Sinclair.  Now available for our favorite action, the BAT 3L This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The...

This is our version of the little ejector tool we made while we were with Sinclair.  This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on our Bolt...

This is our version of the little ejector tool we made while we were with Sinclair.   This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on...

This is our version of the little ejector tool we made while we were with Sinclair.   This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on...

This is our version of the little ejector tool we made while we were with Sinclair.  This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on our Bolt...