Neck Turning Equipment

Looking for a replacement cutter for your Sinclair 1000, 2000, or 4000 Neck Turning Tool?  Look no further. These cutters are a direct replacement ground from carbide so they'll last pretty much forever.

PMA Carbide Neck Turning Mandrels (PCM-10xx) When treated and maintained properly, stainless steel mandrels (specifically 17-4 stainless) will retain their size and finish for years under normal use, satisfying the needs of most reloaders. That being...

The same Model A Neck Turning Tool, but will accept K&M neck turning pilots. WILL NOT ACCEPT PMA, SINCLAIR OR 21st CENTURY MANDRELS.   We've improved our Model A with an updated cutter with more relief to keep the mandrel cooler and be able...

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

 Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as...

Looking for a replacement cutter for your Sinclair 1000, 2000, or 4000 Neck Turning Tool?  Look no further. These cutters are a direct replacement ground from carbide so they'll last pretty much forever.

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

For use with large caliber expander and neck turning mandrels on a 5/8" shank. Expanding the case neck is an important step in the neck turning process, but many reloaders are finding case neck expanding equally important even if not neck turning...

Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as a...

  Our Neck Expanding Mandrels are designed to fit both the PMA and Sinclair Large Caliber Expander Dies. Large Caliber Expanding Mandrels are available in the following calibers: 35, 36, 375, 408, 416, and 50...

  Our Neck Expanding Mandrels are designed to fit both the PMA and Sinclair Large Caliber Expander Dies. Large Caliber Expanding Mandrels are available in the following calibers: 35, 36, 375, 408, 416, and 50...