Rifle Cleaning

These small brass collets will adapt any brand of cleaning rod to fit the Dewey Rod Case Collet on our Stainless Rod Cases. The brass adapter is .375” long and is secured to the cleaning rod with one small allen screw. The adapter is intended to be...

These small brass collets will adapt any brand of cleaning rod to fit the Dewey Rod Case Collet on our Stainless Rod Cases. The brass adapter is .375” long and is secured to the cleaning rod with one small allen screw. The adapter is intended to be...

Benchrite Super Bolt Lube is a lubricant for the body of the bolt. This oil will make any bolt action rifle work more smoothly.Place a drop of this oil on your finger tip and rub it onto the body of your rifle's bolt and feel the difference in...

Our Cleaning Rod Case Connectors are machined from Acetal (Delrin) and come in two rod connector sets and three rod connector sets. All connector sets include stainless steel set screws for securing the rod tubes. Connectors are designed for our...

Our Cleaning Rod Case Connectors are machined from Acetal (Delrin) and come in two rod connector sets and three rod connector sets. All connector sets include stainless steel set screws for securing the rod tubes. Connectors are designed for our...

V-Block featuring a cup to secure the spring pin that retains the ejector plunger on your bolt. Our Ejector Removal Tools snap in place to prevent rotating and for storage.

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT 3L or Neuvo bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

This handy little gadget slips over the bolt shroud to make removing the fire control from your Kauger bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT 2L bolt an even easier task. There are two different shroud shapes on BAT actions and this tool handles both. One side of the tool removes one shroud...

Bore Tech C4 is specifically formulated to easily remove carbon/powder fouling from rifle barrels, chamber throats, revolver faces, tuners or suppressors. C4 works by a completely chemical action to lift the fouling and suspend it without redepositing on...

Chameleon Gel safely cleans fouling in half the time of traditional abrasive bore pastes by utilizing a micron sized, silica based polish that creates an activation site for the patented chemical technology to quickly and effectively clean. It also...

Bore Tech’s Cu+2 is a new solvent designed specifically to remove copper fouling from rifle bores quickly and easily. This formula is said to change the “electronic state” of the copper atoms and suspend them in the solvent for easy...