Rifle Cleaning

Butch’s Gun Oil is a truly superior bore protectant and conditioner when used to follow any bore cleaner. Bore oil follow up to cleaning will greatly reduce copper fouling and make carbon fouling sweep right out of the bore with the next solvent...

Cotton bore mops used to wipe excess solvent and crud from inside your rifle's chamber. Use with chamber mop rod.

These cotton mops are used by just about every competition shooter to wipe out and dry the rifles chamber after cleaning the barrel. Cleaning rod guides do not reach all the way to the chamber throat, so some solvent or oil is always left in the chamber...

This is our version of the little ejector tool we made while we were with Sinclair.  Now available for our favorite action, the BAT 3L This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The...

This is our version of the little ejector tool we made while we were with Sinclair.  This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on our Bolt...

This is our version of the little ejector tool we made while we were with Sinclair.   This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on...

This is our version of the little ejector tool we made while we were with Sinclair.  This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on our Bolt...

Empty 10cc syringe for those wishing to fill with their own bolt grease formula. This is the same syringe we use for Blue Goo Bolt Grease, comes with a needle spout cap. Update 05/31/17 - Out of stock for about two weeks

These unbreakable solvent bottles come with a flip-up lid to make it easy to put solvent or oil on a patch or brush through the solvent port of your rod guide. The bottles hold 5 ounces of solvent, and they are fluoride coated to prevent solvents and...

Since we've switched to using 1st Choice Bore Cleaner we've noticed that our old tuner cleaner just really wasn't cutting it, so we went back to the drawing board and back to our original design, with a new simplified twist.  The Gen 2 Tuner...

Nylon brush for cleaning the inside of the case neck. Stiff blue nylon.

Nylon brush for cleaning the inside of the case neck. Stiff blue nylon.