Rifle Cleaning

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT 2L bolt an even easier task. There are two different shroud shapes on BAT actions and this tool handles both. One side of the tool removes one shroud...

This handy little gadget slips over the bolt shroud to make removing the fire control from your BAT Neuvo bolt an even easier task. Tool will even remove fire control when decocked which is very handy.

Bore Tech C4 is specifically formulated to easily remove carbon/powder fouling from rifle barrels, chamber throats, revolver faces, tuners or suppressors. C4 works by a completely chemical action to lift the fouling and suspend it without redepositing on...

Chameleon Gel safely cleans fouling in half the time of traditional abrasive bore pastes by utilizing a micron sized, silica based polish that creates an activation site for the patented chemical technology to quickly and effectively clean. It also...

Bore Tech’s Cu+2 is a new solvent designed specifically to remove copper fouling from rifle bores quickly and easily. This formula is said to change the “electronic state” of the copper atoms and suspend them in the solvent for easy...

Eliminator is a fairly new bore cleaner from Bore Tech which is rapidly gaining popularity in the Benchrest shooting community. Eliminator is one of the “new breed” of bore solvents which are non-hazardous, contain no ammonia, are...

Butch’s Bore Shine is a ”traditional” type bore solvent. It contains ammonia for dissolving copper, chemical cleaning agents for carbon removal and protective lubricants for barrel conditioning. Butch’s is probably the most used...

Butch’s Gun Oil is a truly superior bore protectant and conditioner when used to follow any bore cleaner. Bore oil follow up to cleaning will greatly reduce copper fouling and make carbon fouling sweep right out of the bore with the next solvent...

Cotton bore mops used to wipe excess solvent and crud from inside your rifle's chamber. Use with chamber mop rod.

These cotton mops are used by just about every competition shooter to wipe out and dry the rifles chamber after cleaning the barrel. Cleaning rod guides do not reach all the way to the chamber throat, so some solvent or oil is always left in the chamber...

This is our version of the little ejector tool we made while we were with Sinclair.  Now available for our favorite action, the BAT 3L This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The...

This is our version of the little ejector tool we made while we were with Sinclair.  This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job. The bottom surface of the tool "snaps" in place on our Bolt...