Product results
Product results
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
New
Scope Lens Covers - Sightron S6 10-60 x56
PMA Tool
$39.95
The lens covers for most scopes are the thread in type. The fine threads of these covers are easy to cross-thread and damage easily from dropping, they also tend to gather dust and grit in their...
PMA 30cal Custom Bullet Board Kits (up to 1.00" length)
PMA Tool
$659.95
Our 30cal Bullet Board Kit include five 150 count bullet boards, "Jacket Funnel" board, "Core Funnel" board, divider board and shaker/storage box. All boards 3D printed in white to show any...
Bolt Disengagement Tool - Borden
PMA Tool
$49.95
We've had so many requests for this tool, we finally had to do something about it.
What sets our Borden Bolt Disassembly Tool apart is the 3D printed construction that allows us to use two different...
Out of stock
Rod Guide Terminus (.725 bolt) - 22/6mm PPC & ARC
PMA Tool
$74.95
This rod guide is for rifles chambered in 22 or 6mm PPC, ARC, Grendel and many wildcats based on those cartridges.
This Rod Guide will fit any action with a bolt diameter between .722" and .725"...
PMA Patch Catcher for Harrells Rimfire Tuners - 22cal
PMA Tool
$19.95
This little doodad accepts nearly any small mouthed 16-20oz water or soda bottle and plugs into your Harrells Rimfire Tuner to catch patches and excess solvents.
For 22cal rimfire only. Does...
PMA Primer Pocket Uniformer Handle Case Prep Center Adaptor (8-32)
PMA Tool
$15.95
This little adapter threads into our Ultimate Uniformer handles replacing the 1/4" hex drive for use with most of case prep motors from RCBS, Lyman, Frankford Arsenal and so many others
Out of stock
Ejector Removal Tool - Solus
PMA Tool
$24.95
This is our version of the little ejector tool we made while we were with Sinclair.
This tool compresses the plunger ejector on your bolt to make knocking out the ejector pin an easy job...
PMA Patch Catcher for Rail Gun (1.450") - 6mm
PMA Tool
$19.95
This little doodad accepts nearly any small mouthed 16-20oz water or soda bottle and squishes over the outside of your railgun barrel (1.450) to catch patches and excess solvents in the bottle...
PMA Patch Catcher for PMA Tuners - 30cal
PMA Tool
$19.95
This little doodad accepts nearly any small mouthed 16-20oz water or soda bottle and plugs into your PMA Tuner to catch patches and excess solvents.
Available in 6mm and 30 caliber. Does not...
PMA Patch Catcher for PMA Tuners - 6mm
PMA Tool
$19.95
This little doodad accepts nearly any small mouthed 16-20oz water or soda bottle and plugs into your PMA Tuner to catch patches and excess solvents.
Available in 6mm and 30 caliber. Does not...
Benchrite Flag Stand Leveler (3D printed)
Benchrite PSE
$26.95
Several fellow shooters have requested this little Flag Stand Leveler. The Leveler sits on top of your flag stand pin and tells you if it's straight or not. Fits both the two popular flag stand pin...
17-22cal Drop Tube for PMA Funnel - 2" Length
Benchrite PSE
$15.95
2" drop tube for our Drop Tube Funnel.
The counter bored tube end will accept cases up to a .255” neck diameter.
30cal Drop Tube Only for PMA Funnel - 2" Length
Benchrite PSE
$15.95
2" drop tube for our Drop Tube Funnel.
The counter bored tube end will accept cases up to a .342” neck diameter.
27cal/7mm Drop Tube for PMA Funnel - 2" Length
Benchrite PSE
$15.95
2" drop tube for our Drop Tube Funnel.
The counter bored tube end will accept cases up to a .321” neck diameter.
25cal/6.5mm Drop Tube for PMA Funnel - 2" Length
Benchrite PSE
$15.95
2" drop tube for our Drop Tube Funnel.
The counter bored tube end will accept cases up to a .300” neck diameter.
6mm Drop Tube for PMA Funnel - 2" Length
Benchrite PSE
$15.95
2" drop tube for our Drop Tube Funnel.
The counter bored tube end will accept cases up to a .274” neck diameter.
PMA 6mm Custom Bullet Board Kits (up to .825" length)
PMA Tool
$659.95
Our 6mm Bullet Board Kit include five 200 count bullet boards, "Jacket Funnel" board, "Core Funnel" board, divider board and shaker/storage box. All boards 3D printed in white to show any...
PMA Rod Guide Solus, Seekins PH3 (.821-.825”) - Standard Magnums
PMA Tool
$74.95
For rifles chambered for standard 7mm and 30 caliber magnums. This includes Winchester, Remington and Weatherby Magnum cartridges, but not the short action versions.
This Rod Guide will fit any...
Out of stock
PMA Rod Guide Solus, Seekins PH3 (.821-.825”) - 7mm PRC / PRCW
PMA Tool
$74.95
For rifles chambered for 7mm PRC, 7mm-6.5PRC and all 7mm wildcats based on the PRC cartridge.
This Rod Guide will fit any action with a bolt diameter between .821
Featured
Bolt Disengagement Tool - Borden
PMA Tool
$49.95
We've had so many requests for this tool, we finally had to do something about it.
What sets our Borden Bolt Disassembly Tool apart is the 3D printed construction that allows us to use two different...
Out of stock
PMA Gen II Barrel Vise
PMA Tool
$84.95
Quite a bit of testing went into the updated PMA Barrel Vise. From the metal finishing on the aluminum to maximize grip and minimize marks left on the barrel to the ability to handle barrels from ...
Out of stock
PMA Front Rest - Benchrest Model
PMA Tool
$2,250.95
We designed the PMA Front Rest to address what we saw as weaknesses in other coaxial front rests in use for benchrest competition. Namely looseness, tightness and in some case instability. Excessive...