Micro Die Adjusters

"B" Tool for 220 Russian, PPC, ARC and Grendel Family.   These little gizmos make measuring the .200 line a fast, repeatable exercise. They hold the case by the base and have a slot at the 200 line for calipers so you get a repeatable measurement...

"C" Tool for 308, BR, 30-06 Families.   These little gizmos make measuring the .200 line a fast, repeatable exercise. They hold the case by the base and have a slot at the 200 line for calipers so you get a repeatable measurement. The 200 line on...

Adjusting a 7/8-14 threaded sizing die (or threaded seater die) to the exact shoulder bump you need is a laborious process. This set of seven 7/8” die shims enables you to set the die up once, then adjust the die in small, exact increments without...

Imperial is the original finger applied “wax” type case sizing lube which many shooters have preferred for decades. Imperial is an extremely hi-lubricity lubricant which is recommended for case sizing, necking up cases, or many case-forming...

Royal Case & Die Lube from Sharp Shoot R products is an extremely high lubricity case sizing lubricant which leaves no tacky residue and wipes off very easily. Will not gum up, safe enough to eat, protects dies and cases from rust and corrosion, and...

Set of 10 notch marked (for easy size identification) .003” - .020” shims for Wilson Hand Seater Dies (shims slip onto seater stem). Set up your bullet seating die with a middle thickness shim and increase or decrease seating depth without...

Set of 10 notch marked (for easy size identification) .003” - .020” shims for Wilson Hand Seater Dies (shims slip onto seater stem). Set up your bullet seating die with a middle thickness shim and increase or decrease seating depth without...

This thumb screw replaces the 10-32 nylon tipped set screw adjustment lock screw.