7/8-14 Sizing Die Shims (Now Stainless Steel)
- SKU:
- 30-004-030
Description
Adjusting a 7/8-14 threaded sizing die (or threaded seater die) to the exact shoulder bump you need is a laborious process. This set of seven 7/8” die shims enables you to set the die up once, then adjust the die in small, exact increments without loosening the die lock ring and starting over. We suggest setting up all threaded dies with a .005” or .006” shim under the lock ring for the initial setting. Sizing .001” more or less from the initial setting is then as simple as changing the shim.
Now made from stainless steel!
5 Reviews
-
Easiest and accurate die adjustaments
I use them on every die for three 6ppc
-
Easiest and accurate die adjustaments
I use them on every die for three 6ppc
-
7/8-14 Sizing Die Shims (Now Stainless Steel)
As soon as I got the shims I miked them and they were spot on. Already using them on an automated bullet feeder I built myself. Very good product. If you need quality tools PMA Tool is a good place to go.
-
Sizing shims 7/8-14
I have been having problems with shoulder bump. Bumping too far which results in case cracks and I had a separation. Have given up on Competition Shell Holders. These shims work well. I have two different 308 rifles and by swapping shims I can easily switch between the two rifles. And control bump to one thou. I had a question and the company owner emailed me back. --jim
-
Sizing Die Shims
The rings have no notches. Very uncomfortable.
Related Products
Related Products
Imperial Sizing Die Wax
Skip Seater Die Shims 22cal. and 6mm
Skip Seater Die Shims 25 to 30cal
JLC Precision Full Length 6 PPC Sizing Die
PMA Tuner 7/8-32 (4.2oz)
PMA Tool