Description
If you haven’t already done it, changing your case prep routine from hand to power will save hours of time and wear and tear on you hands. Case prep operations that can be performed while using the PMA Case Holder system include: inside/outside case mouth deburring, neck turning, inside/outside neck cleaning and flash hole deburring (thanks to the new design of the PMA Tool Case Driver and the 21st Century Shooting Deburring Tool).
The PMA Case Holder Drivers work with PMA Case Holders and are primer pocket specific, meaning that we manufacture two models; one specifically for small rifle primer pockets and one for large rifle primer pockets. This design improves three factors for you: 1) locks the case more securely, 2) turns the case more concentrically and 3) releases the case more easily (keeps the tool from swaging into the primer pocket and getting stuck).
The 1/4” hex shaft will work with nearly all power screwdrivers and any hand drills or power centers that have an adjustable chuck.
18 Reviews
-
Works great
Works as needed.
-
Driver case holder
Works great , it runs very true in my drill chuck . time saver ! thanks PMA
-
223 Rem Case Holder
I purchased this for 223 Rem & 204 Ruger. I really like how well it holds the cases for turning brass.
-
Best driver for turning cases with a driver or drill
To gain better verticals at extended distances I have taken to turning all my brass necks for consistent neck tension. These drivers hold the brass tightly, making it easy to turn necks to a consistent thickness.
-
PMA Driver for Case Holder
The small rifle primer driver fits both 6mm BR Norma as well as the 308 Palma Small Rifle Primer. The thread match-up is critical and the parts fit together like hand in glove
-
the knurled part could be a little bigger
it was hard to unlock the turned case so I put a bigger collar over it . like a cordless drill chuck
-
the knurled part could be a little bigger
it was hard to unlock the turned case so I put a bigger collar over it . like a cordless drill chuck
-
Makes Neck turning easy
with the PMA Neck Turning Tool Model A 30 degree the case holder this and a Dewalt electric screw driver neck turning 30BR and 6.5x47 Lapua brass is actually enjoyable, well as enjoyable as brass prep can ever be.
-
Driver for case holders small rifle
When putting the parts together, the first thread on the driver had several small boogers on it. I had to grease the threads and run the case holder on and off several times to free it up. It shouldn't have to wear in over time.