Neck Turning Equipment

 Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as...

These carbide neck turning tool cutters are replacements for both Sinclair and Don Nielson "Pumpkin" neck turning tools.   Currently available in 20, 30, and 40 degree

For use with large caliber expander and neck turning mandrels on a 5/8" shank. Expanding the case neck is an important step in the neck turning process, but many reloaders are finding case neck expanding equally important even if not neck turning...

PMA Carbide Neck Turning Mandrels (PCM-10xx) When treated and maintained properly, stainless steel mandrels (specifically 17-4 stainless) will retain their size and finish for years under normal use, satisfying the needs of most reloaders. That being...

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

Accepts PMA Tool Caseholders.  Driving spindle for Benchrite Case Neck Lathe. For use with cases with small rifle primer pockets.

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

Our standard silicone soft and grippy handle threaded 8-32 for use with case neck brushes or other 8-32 accessories. Shown with case neck brush installed. Brush not included.

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

Accepts PMA Tool Caseholders.  Driving spindle for Benchrite Case Neck Lathe. For cases with large rifle primer pockets.

  Our Neck Expanding Mandrels are designed to fit both the PMA and Sinclair Large Caliber Expander Dies. Large Caliber Expanding Mandrels are available in the following calibers: 35, 36, 375, 408, 416, and 50...