Neck Turning Equipment

The PMA Big Boy Model A Neck Turning Tool is a scaled up version of our standard Model A Neck Turner and is packed with all the same features. Just as the name implies, this tool is sized appropriately to handle neck turning of 35 caliber up to 50cal...

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

Our standard silicone soft and grippy handle threaded 8-32 for use with case neck brushes or other 8-32 accessories. Shown with case neck brush installed. Brush not included.

Used in our Large Caliber Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with Sinclair Expanding Mandrels. PMA does not currently manufacture large caliber expanding mandrels. Most importantly,...

Accepts PMA Tool Caseholders.  Driving spindle for Benchrite Case Neck Lathe. For cases with large rifle primer pockets.

  Our Neck Expanding Mandrels are designed to fit both the PMA and Sinclair Large Caliber Expander Dies. Large Caliber Expanding Mandrels are available in the following calibers: 35, 36, 375, 408, 416, and 50...

 Machined from solid stainless steel, the PMA Case Holders are cartridge case head specific and will work with our Case Holder Drivers for powering the neck turning operation as well as other case prep operations. The Case Holders will also work as...

 Used in our Model A Neck Turning Tool, these stainless steel Neck Turning Mandrels are sized to work in conjunction with PMA Expanding Mandrels. Our mandrels are also properly sized to work with expander mandrels from Sinclair and will work with...

This product includes Benchrite's new Threaded Chuck Spindle and the Jacobs Keyless Chuck assembled and ready to go on your Case Neck Turning Lathe. You can chuck a case neck brush, primer pocket uniformer, flash hole reamer or any other accessory you...

This mandrel measures a nominal .242". Our standard neck turning mandrels measure .002" under bullet diameter. Over the years we have had several requests to make a neck turning mandrel that measures .001" under bullet diameter.   Used in our...

PMA Carbide Neck Turning Mandrels (PCM-10xx) When treated and maintained properly, stainless steel mandrels (specifically 17-4 stainless) will retain their size and finish for years under normal use, satisfying the needs of most reloaders. That being...

The same Model A Neck Turning Tool, but will accept K&M neck turning pilots. WILL NOT ACCEPT PMA, SINCLAIR OR 21st CENTURY MANDRELS.   The PMA Neck Turning Tool is the best neck turner available today. You know why you need or want to...